Solar-wind hybrid system (with solar tracking)

In the hybrid system a micro-wind turbine Zephyr Airdolphin is integrated with 2 photovoltaic panels equipped with a mono-axis solar tracker.

Zephyr micro wind turbine

Nominal power: 1 ÷ 4 kW
Rotor Diameter: 1,8 m
Concerning area (circular layout projection): 2,5 m² (only the turbine)
Micro-wind turbine mass: 19,5 kg
Annual production with average wind speed: 1.300 kWh (5 m/s); 2.000 kWh (6 m/s); 3.000 kWh (7 m/s)
Tolerance to wind power: 100 kg with wind power at 20 m/s
Noise with wind power at 6 m/sec: 48 dBA
CO₂ payback (carbon footprint): some months instead of some years for the vertical-axis micro-wind turbines
Warranty: 5 years
Maintenance: not necessary

Photovoltaic plant

N° installable PV panels: 2
Peak power: it depends on the PV panel type (e.g. 600 W_p)
Mono-axis sun following system: azimuth
Increase of the produced energy: +15 ÷ 20% in comparison to the fixed installation
Annual production with 1200 equivalent hours: 864 kWh
Concerning area (layout projection): 3,1 m²
Tolerance to wind power: 50 kg with wind power at 20 m/s
Warranty: 5 years
Maintenance: grease lubrication once a year

If you need further details or information about the purchase of the hybrid system, please fill the contacts page.


	Industrial Automation Flexible and reconfigurable assembly lines Collectors assembly lines Thermostatic valves assembly lines Automatic assembly and test Enel kWh meter assembly, test and calibration Mounting pipe fittings on flexible tubing Automatic handling with six axis robots Automatic laser marking line Control system for fresh pasta treatment line Machine for binding spirals Renewable energy Hydrogen generation and fuel cells HOD Hydrogen generator Photovoltaic systems with monoaxial sun tracker Automatic biaxial sun tracker Parabolic solar concentrators Fresnel lenses solar concentrators DiGespo project about solar energy Zephyr Airdolphin micro wind generator Solar-wind hybrid system Stirling engine Plants Isera district Hydrogen plant Adamello refuge Hydrogen plant Electronics High performances process controller (PLC) Process controller (PLC) Automatic biaxial sun tracker Special Working Five axis laser cutting center Three axis laser cutting center Porphyry cutting line Aeronautical light alloys mechanical working Robot for wood panels plastering Medicals Rotating fistulas assembly Automatic oligonucleotides synthesis Instruments and accessories Optical fibers test Services Remote assistance Remote video assistance Special plants monitoring systems	Solar-wind hybrid system (with solar tracking) In the hybrid system a micro-wind turbine Zephyr Airdolphin is integrated with 2 photovoltaic panels equipped with a mono-axis solar tracker. Zephyr micro wind turbine Nominal power: 1 ÷ 4 kW Rotor Diameter: 1,8 m Concerning area (circular layout projection): 2,5 m² (only the turbine) Micro-wind turbine mass: 19,5 kg Annual production with average wind speed: 1.300 kWh (5 m/s); 2.000 kWh (6 m/s); 3.000 kWh (7 m/s) Tolerance to wind power: 100 kg with wind power at 20 m/s Noise with wind power at 6 m/sec: 48 dBA CO₂ payback (carbon footprint): some months instead of some years for the vertical-axis micro-wind turbines Warranty: 5 years Maintenance: not necessary Photovoltaic plant N° installable PV panels: 2 Peak power: it depends on the PV panel type (e.g. 600 W_p) Mono-axis sun following system: azimuth Increase of the produced energy: +15 ÷ 20% in comparison to the fixed installation Annual production with 1200 equivalent hours: 864 kWh Concerning area (layout projection): 3,1 m² Tolerance to wind power: 50 kg with wind power at 20 m/s Warranty: 5 years Maintenance: grease lubrication once a year If you need further details or information about the purchase of the hybrid system, please fill the contacts page.