Three axis laser cutting center

Laser machine in object has been developed thanks to the experience achieved by El.Ma. in working with light alloys, that has amply demonstrated the advantages tied to these types of solutions that beyond furnishing an elevated static rigidity of the welded structure they also guarantee an elevated value of dynamic rigidity with a high damping coefficient.

This is a medium size machine with three cartesian axis (X,Y,Z); the configuration of the structure was considered to guarantee absolute lack of vibrations and high-speed axis movement (1000 mm/s for X e Y axis and 500 mm/s for Z axis).

Within the choice of the configuration, the accessibility of the operator has been taken into account (his interventions can be limited to pieces load and unload) , as well as the attainment of maximum rigidity within the defined dimensions.

Principal components of this machine are the basement with the table above, with respective X (longitudinal) and Y (transversal) axis, and the fixed vertical structure that supports the laser source (50W up to 400W, depending on application) with respective movement along Z axis.

The prototype has been developed to product ornamental colums in polymeric materials.


	Industrial Automation Flexible and reconfigurable assembly lines Collectors assembly lines Thermostatic valves assembly lines Automatic assembly and test Enel kWh meter assembly, test and calibration Mounting pipe fittings on flexible tubing Automatic handling with six axis robots Automatic laser marking line Control system for fresh pasta treatment line Machine for binding spirals Special Working Five axis laser cutting center Three axis laser cutting center Porphyry cutting line Aeronautical light alloys mechanical working Robot for wood panels plastering Instruments and accessories Optical fibers test Electronics Numerical control CN2 New generation numerical control CN3 Automatic solar following system Medicals Rotating fistulas assembly Automatic oligonucleotides synthesis Energy Hydrogen generation and fuel cells HOD Hydrogen generator Isera plant Adamello refuge plant Parabolic solar concentrators DiGespo project about solar energy Zephyr Airdolphin micro wind generator Stirling engine Services Remote assistance Remote video assistance	Three axis laser cutting center Laser machine in object has been developed thanks to the experience achieved by El.Ma. in working with light alloys, that has amply demonstrated the advantages tied to these types of solutions that beyond furnishing an elevated static rigidity of the welded structure they also guarantee an elevated value of dynamic rigidity with a high damping coefficient. This is a medium size machine with three cartesian axis (X,Y,Z); the configuration of the structure was considered to guarantee absolute lack of vibrations and high-speed axis movement (1000 mm/s for X e Y axis and 500 mm/s for Z axis). Within the choice of the configuration, the accessibility of the operator has been taken into account (his interventions can be limited to pieces load and unload) , as well as the attainment of maximum rigidity within the defined dimensions. Principal components of this machine are the basement with the table above, with respective X (longitudinal) and Y (transversal) axis, and the fixed vertical structure that supports the laser source (50W up to 400W, depending on application) with respective movement along Z axis. The prototype has been developed to product ornamental colums in polymeric materials.